We have for sale a demo unit FF6.2L Professional dj mikser from Funktion one. 

Formula Sound and Funktion One have collaborated once again with the aim of producingthe best analogue signal path mixer in the world - the FF6.2L

Balanced inputs on channels 1 & 2 are on 3 pole 1/4 inch jack sockets. The compressors on channels 1 & 2 operate on both Mic and balanced line inputs. The compressor has a LED threshold indicator and the compression and threshold can be adjusted using hidden controls through the base of the Mixer. Inputs are selected by a switch at the top of each channel. Channels 3-6 have RCA phono connectors with the upper pair being line input and the lower pair phono. Master and booth outputs are both balanced XLR. AUX outputs are balanced on 3 pole 1/4 inch jack sockets. Record outputs are on unbalanced phono sockets. A mono balanced output is on XLR, this output may be switched to Sub Bass using a control through the base of the mixer. The insert is enabled with a switch just below the master volume control. There is a 2 pin remote mute connector for use with a fire alarm or similar. This mutes the music but leaves the console mic on (if Ch1 and / or 2 MIC inputs are set to Post Booth then these will also be on). The Booth and Master have left and right 12 LED stereo metering. The Booth has a mono switch and pan pot, the console Mic is excluded from the booth output and Channel 1 & 2 Mics are selectable. Each input has a recessed gain trim on the rear panel (except balance line on 1 & 2). The microphone inputs all have a phantom power switch through the back panel. The microphone inputs are all on XLR and the Mic gain trims are multi turn potentiometers for extra fine adjustment. The Zone output is balanced on a 6 pin connector. The Zone level is controlled by a remote panel that connects to a 3 pin connector just below the Zone output - this panel may be located in a different room. Insert is on 3 pole 1/4 inch jack sockets (send and return). Two headphone outputs are provided (headphones must be at least 32 ohms impedance). The Mixer has 2 built in fans that must not be blocked; a space must be left around the mixer for ventilation.

Channel Features

• • 6 Channels.

Rear Panel Controls

FF6.2L Rear Panel

• The image shows the FF6.2L rear panel.

Master Section

• Very comprehensive effects routing and mixing facilities

Outputs

• Master output available in stereo and mono on XLR connectors (balanced)
• Zone output available in stereo and mono on XLR connectors (balanced)

Audio Quality

• The FF6.2L and FF4.2L are designed to be the best quality professional DJ / Club mixers in the world
• Built in the UK using top quality components, no expense has been spared in producing the best DJ mixer possible

Dimensions: 445 mm x 370 mm x 125 mm
Weight: 10 kg